某电厂600MW火电机组脱硫增容改造方案探讨

按照国家环保部文件要求，大唐集团河北某电厂600 MW机组湿法脱硫系统需进行增容改造。该电厂根据实际情况，归纳了3种可行的脱硫增容改造方案，即原吸收塔增加喷淋层和高度、双吸收塔串联、双吸收塔双循环，阐述了各自的技术特点，结合性能保证、工程投资、施工周期等影响因素，比较了各方案的优缺点。经过对比和论证，双吸收塔方案比单吸收塔方案更适合于本次工程改造。     

强化混凝去除黄浦江水有机物的试验研究

强化混凝去除有机物的效果与水源的分子量分布特性有着密切的关系.由于黄浦江水中低分子量的溶解性有机物占多数,因此,强化混凝处理有机物效果有限.对于＜1k分子量区间的有机物.增加混凝剂投量可有效去除紫外吸光值(UV254),但去除溶解性有机碳(DOC)的效果很差.尽管增加混凝剂投量和降低pH都能有效地去除有机物,但决定强化混凝效果的主要因素是pH,去除黄浦江水有机物的最佳pH范围为6～5.     

1000MW机组电除尘器的设计及技术改进

介绍了1000MW机组电除尘工程的特点及其电除尘器的设计难点，针对1000MW机组电除尘器设计中的诸多不利因素提出了具体的改进措施。     

强化混凝工艺深度处理给水厂排泥废水

水厂废水的综合处理与回用是我国供水行业的新趋势和节水目标所在,采用强化混凝技术进行水厂排泥废水的深度处理。通过混凝剂筛选实验和有机物表征确定最佳混凝剂为高效聚合铝(HPAC),适宜投加量为650 mg/L。当混凝剂HPAC投加量为650 mg/L时,对COD、TOC、浊度和色度的去除率分别为82.5%、89.8%、95%和92.5%,相应的出水值分别为58 mg/L、8.46 mg/L、2.35 NTU、13度,COD满足《污水综合排放标准》(GB 8978-1996)的要求(COD≤100 mg/L),同时实验结果显示聚合氯化铝(PAC)、HPAC、三氯化铁(FeCl3)主要去除分子量处于>1 300 Da范围的有机物,对分子量处于744～1 300 Da之间的有机物去除有限。     

中波发射台电磁辐射环境影响理论预测与模拟类比方法的比较分析

中波台发射设备项目电磁辐射环境影响评价采用理论计算和模拟类比方法结果一致，运用理论计算方法评价结果相对偏安全。     

Purification and molecular weight distribution of a key exopolysaccharide component of Bacillus megaterium TF10

Extracellular polymeric substances (EPS) are organic metabolic compounds excreted by microorganisms. They largely impact microbial aggregate structures and functions. Extracellular polysaccharides (EP) in EPS are responsible for the formation of microbial aggregates. In this work, we successfully separated and characterized EP from EPS of the bacterium Bacillus megaterium TF10. Extraction of EP from EPS was optimized using Sevag''s reagent. Chemical characteristics, functional groups, and molecular weight (MW) distribu-tion of EP were compared with the harvested EPS and soluble microbial products (SMP). We found that the polymers of lower MW and free proteins were successfully removed by Sevag''s reagent. The higher MW components of EPS were predominantly polysaccharides, while the polymers of lower MW tended to secrete to the supernatant and were described as SMP. A part of the proteins in the EP was polysaccharide-bonded. Our results can be further used in elucidating the complex flocculation mechanisms in which EP play a major role.     

330MW循环流化床机组协调控制系统的特点分析与应用实例

循环流化床机组在动态特征上不同于煤粉炉,其燃料煤粒较粗,燃烧过程复杂,并且因为其燃烧室内的床料具有相当大的热惯性和蓄热能力,是以当给煤量改变后,主蒸汽压力的变化相应比煤粉锅炉的迟延和惯性要大得多,造成了循环流化床机组燃烧过程实现自动协调控制的困难。以京海煤矸石发电有限责任公司凤凰岭电厂新建工程2×330 MW循环流化床机组控制系统为例,从变参数的应用、前馈的应用、主压力与给水的解耦控制、煤质修正控制等多方面阐述了循环流化床机组的控制特点,分析探讨了应用中存在的问题并提出了解决方法。     

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

百色市中波台对塔吊感应高压电的影响及防护研究

电磁辐射主要通过感应耦合或电磁耦合使主要由金属部件组成的塔吊感应高压电,而塔吊的结构及架设常使其更容易遭受电磁辐射的影响,特别是有中波发射塔存在的区域电磁辐射水平较高,对塔吊的影响较为明显,从而危及施工人员和财产安全。针对百色市二四二中波发射台的电磁辐射状况,通过对电磁射源及电磁环境特点等方面进行分析与计算,利用等效电路模型探讨电磁辐射对附近施工建筑塔吊感应高压电的影响,得出塔吊的谐振点、中波发射台在塔吊处的电场强度及感应电压。采取绝缘、重复接地和避开谐振点方法解决长期以来建筑塔吊临近通讯发射源感应高压电而难于防护的突出问题,从而提高塔吊在电磁辐射环境中工作的安全性,并对此类领域的研究或对类似感应电的防护提供科学借鉴。     

A numerical investigation of fluid-structure coupling of 3 MW wind turbine blades

In this paper, computational modeling is created for 3 MW wind turbine blade using the software Solidworks, and the computations are carried out using Workbench for the fluid–structure interaction of blades due to both the rated and the extreme wind load. The methods developed are applied to the simulation of the NREL Phase VI wind turbine blades, and validation against published data is presented. Moreover, the static structural analysis for wind turbine rotor is performed using Mechanical APDL. The results show that the maximum values of stress reach 458 MPa and 76.9 MPa due to the rated and extreme wind load, respectively, which are lower than 78.3 MPa, the flexural strength of Swancor 2511-A epoxy resin for blade material.